INSTALLATION
Install your dryer in a room which is not subject to
extreme conditions.
When operating the tumble dryer, the room has to
be adequately ventilated to avoid possible back
flow of gases into the room from other appliances
burning fuels, such as cogaz and includinal, g
open fires.
Remove the protective foil from the control panel.
Level the dryer adjusg thetin 2 feet at the front.
Take care not to trap the mains cable between the
dryer and the wall.
Stacking kit
Your dryer can be stacked on top of your washing
machine, usgin the stackg kinit AMH 542, which is
available from your dealer.
Minimum housing dimensions:
Width: 600 mm
Height: 850 mm
Depth: 560 mm
ELECTRICAL CONNECTION
The electrical connection has to be carried out
in compliance with local regulations.
Information on the permissible operating
voltage, the power consumption and the
required fuse protection is given on the rating
plate on the back of the dryer.
The earthing of this dryer is compulsory by
law.
Do not use extension cords or multiple
adapters.
Before any maintenance on the dryer,
disconnect it from the mains supply.
Do not operate the dryer if it has been damaged
during transport. Contact a qualified service
technician.
In case of replacement of mains cable contact
a qualified service technician.
16 |